Compare Hot Wheels Dragon Fire Track Set

Buy Hot Wheels Dragon Fire Track Set

Hot Wheels Dragon Fire Track Set Product Description:

• Launcher sends your vehicle through 3 inverted jumps, 4 crash zones and 4 motorized boosters
• Time your jump just right and you'll hit the dragon's fire breath and behead this mighty beast, miss and you're fried
• Action packed Hot Wheels Racing
• Includes one vehicle
• Take on the Fire Breathing Dragon with the power of Hot Wheels

Product Description

How many cars will you need to take out this savage dragon? Speed through three inverted jumps, four crash zones and four motorized boosters. Avoid the terrifying teeth and take the super loop to behead this mighty beast! Includes one 3" vehicle. Requires 4 "D" batteries, not included. Not for use with some Hot Wheels vehicles. Colors and decorations may vary.

Customer Reviews

Most helpful customer reviews

17 of 17 people found the following review helpful.
Pretty fun, but has a few issues
By Jennifer Atwood
Overall this toy is super fun. I like the mechanical portion and it works well. The toy works as advertised. The only issue I have is with construction. I pinched my hands several times trying to put together the twisting ramps. It also required a lot of leverage on my part to connect everything. Just be careful when assembling. The toy comes apart for transport very easily, though! Be careful: Don't bend the plastic parts by force. This is easy to do, but if you are patient it will work out. My son is 7 and enjoys this toy a great deal.

4 of 4 people found the following review helpful.
A bit of a bore...
By Tom H
This toy is all flash and no substance. It works. The cars shoot around the track a few times befire they finally wipe out. But the boosters don't seem to have anough torque to recover from one car to the next so if you try to run more than one car at a time, it's likely the second car through the booster will not make it around the loop.But all that aside, the toy is a bore. My kids (ages 3 and 5) were on FIRE to get this toy up and running and were so excited once it was assembled to play that they could hardly contain themselves. About 15 minutes after they started playing, they lost interest and went back to manually sending their hotwheel cars down the simple track going down the stairs to the basement. The toy just has no substance. You put a car in, it shoots around for a while, then it eventually flips over or something and stops. The end. It was more fun to build having my kids searching for and handing me the right lettered track piece than it was to play with. But I must admit, they were certainly sold on it's packaging hype and flashy layout.Final word: Fun to watch for a few minutes, but not worth the $40. There are much more engaging ways to entertain a child for that much money.

2 of 2 people found the following review helpful.
The gift that keeps on giving!
By Traffic Pro
We first bought this toy for my son's friend (both age 3). His father and I had to assemble the toy in front of 4 very "eager and energetic" kids so that they could start playing it. Assembly was quite easy for being placed under that type of pressure. The track pieces are letter-coded, making it very simple to figure out with/without instructions. For Christmas, I assembled the toy the night before (now I'm a pro) so that he could immediately start playing with it. It's quite durable and my son carried it upstairs to his room with no problems. Another reviewer commented about the fingers getting caught in the wheel. I agree. But, we have taught our son to turn off the machine whenever it jams before trying to fish out the stuck vehicle. No problems! Quick tip: Play with the toy on a hard/smooth surface. We noticed that on carpet the cars don't make it through the track as well as on hardwood floors, etc...makes the fun last and last.

See all 13 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons of Honeywell S8610U3009 Furnace Intermittent Pilot Control

Buy Honeywell S8610U3009 Furnace Intermittent Pilot Control

Honeywell S8610U3009 Furnace Intermittent Pilot Control Product Description:

• Ignition sequence, flame monitoring, and shutoff for intermittent pilot central furnaces
• Provides 100 percent pilot gas shutoff if pilot fails to light
• Includes spark cable adapters to allow field replacement without replacing existing spark cable
• For use in single or dual rod / remote sense applications
• For use with Natural or LP gas

Product Description

Honeywell model S8610U3009 Universal Intermittent gas module control For Single Or Dual Rod Flame Sensing With Vent Damper Plug. For use on Natural or LP Gas. 90 Sec Trial For Ignition. 5 Min Shutoff. Continuous Retry. 100% Shutoff. Provides ignition sequence, flame monitoring and safety shutoff for intermittent pilot central furnaces and heating appliances. Provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated. Ignition trial/delay sequence is repeated until the appliance lights or call for heat is removed. Functional equivalent of S86, S8600, S8610 and S90 modules. New model replacement for older S8610U1003 which is now obsolete.

Customer Reviews

Most helpful customer reviews

12 of 12 people found the following review helpful.
There is a trick to using this controller
By David Fiddes
My furnace was turning the main burners of and on continuously. In my effort to debug the problem I suspected the controller. This new one is an upgrade to my old controller because it has diagnostic lights to let you know if there is a problem. Here is the trick. If I followed the wiring diagram as suggested in the manual, the controller did not work at all. I went on line and found someone who had the same problem. Instead of connecting the 24 volt line to the 24volt tab, it needed to be connected to the TH-W tab. The manual does not specify this, so only try this trick if it doesn't work for you right out of the box. It has now been operating for the last two months without issues. I expect it to work for the next several years.

6 of 6 people found the following review helpful.
Good Replacement Unit, added some more life to an Old Furnace
By M. Kohlman
(This Unit was Purchased to replace a Honeywell S8600H1006 Control Model in a Williamson Propane Furnace and the review should be based on that Information)Several weeks ago our Furnace (a Frankenstein Williamson Propane Furnace with a Coleman A/C Retrofit) began experiencing a number of start-up issues where the pilot light would light followed by the burner igniting and shutting off shortly after, or a short-cycle (where the furnace would operate for a few minutes, shut off, then try again after 10 minutes or so) or go through a warm-up cycle followed by a shut-off when the blower came on. Killing Power to the system for about 30-60 minutes would usually make things behave for a few days before the problems would arise again.Since our current plan is to go to a new Geothermal System in the next 20 months or so I wanted the keep the repair low-cost if possible and given the age and set up of the current system I knew the likelihood of finding an exact part-replacement was not likely so I was pleasantly surprised to see this unit and the positive feedback; I ordered this along with a Q345A1313 Honeywell Pilot Burner. While I did not believe the Pilot Burner/Sensor was the source of the problem, I also did not want to have the Furnace partially disassembled and find out it too needed to be replaced. The S8600U3009 shipped promptly from Patriot Supply and I had it in my Mailbox within in 5 business days from day-of-order.One thing I want to emphasize here for anyone reading this. YOU ARE MESSING AROUND WITH A MACHINE THAT MANAGES A HIGHLY COMBUSTABLE GAS. IF YOU ARE EVEN IN THE SLIGHTEST WAY AMBIVALENT OR UNSKILLED IN PERFORMING THIS KIND OF WORK HIRE A PROFESSIONAL WHO KNOWS THAT THE H#@! THEY ARE DOING. SAVING THE $$$ ON THE INSTALLATION IS NOT WORTH YOU OR YOUR FAMILY'S LIFE.OK, with that warning aside; installation was a smooth one, with theS8610U3009 being a physically-exact-drop-in replacement for the S8600H1006. All that was needed was to remove the mounting bracket that the old control unit was on, remove the control unit from the bracket, and then reversed the procedure with the new unit.The one issue that I ran into is same one that many reviewers seem to be running into, which is the input wiring connections of the new vs. the old Honewell units. With the Old Unit there was 3 24V connections: one was an output connection which was an obvious translation from the old unit, but the other two are more vaguely marked 24V(1) and 24V(2). The newer unit has a 24V-GND, a 24V, and a TH-W, with no clear documentation on how those should be translated. Like others, going with the obvious choices (which to me at least would be hooking up the 24V(1) and 24V(2) to the 24V-GND and the 24V connections) proved fruitless. Eventually it took spending a little bit of time going over the schematics of the old S8600H unit vs. the newer S8610U unit to figure out that the working setup was to connect the old 24V(2) line to the 24V-GND and the 24V(1) line to the TH-W connections. At this point the status-LED indicator came on and the unit attempted to cycle (which was not yet successful as the Gas was still shut off). This seems to be such a common issue, even with direct Honeywell -> Honeywell upgrades that it would be nice if this was mentioned in their generally well-written conversion charts and documentation.Once that all looked good, I shut off power, turned on the gas, and did a leak test on all the gas joints that may have been disturbed during the process. (I usually do a detector leak test - a good DIY detector is the General Tools NGD100 Natural Gas Detector which can also be found via Amazon - followed by a bubble test if the Detector produces any kind of positive result). With no detected Gas leaks after having the Gas repressurized for about 10 minutes, the Furnace was turned back on and run through a full cycle.Everything works great and the furnace has now run through about 30 cycles in the last 48 hours with no issues. I did not have to use the Pilot Igniter/Sensor Kit but have put it aside in case I need it in the future. In any case it was worth the few extra bucks to have it on-hand during the repair process.For the advanced DIY person, I would recommend this as a very inexpensive and viable alternative to a new furnace. The only reason I did not give 5 Stars was because of what seems to be a common wiring translation issue with the 24V connections is not well documented by Honewell, even for upgrades on their own units. If they had done that this would be considered a perfect repair experience.

2 of 2 people found the following review helpful.
Perfect Fit
By Randall S. Strine
This was a perfect replacement for my Honeywell S86E. Very impressive extra parts and adapters included in the box. I paid attention to other reviews and timing settings for its replacement. Out of the box it had all of the correct settings in place. I just turned off the power, switched out the wires one by one, turned the furnace back on and wonderful heat again. I have had it 3 months now and it works perfectly. I saved a lot of money doing this myself. You can do it!

See all 11 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where Can I Buy Sea Gull Lighting 40023-05 Darien Four-Light Vanity, Chrome Finish with Etched Opal Glass

Buy Sea Gull Lighting 40023-05 Darien Four-Light Vanity, Chrome Finish with Etched Opal Glass

Sea Gull Lighting 40023-05 Darien Four-Light Vanity, Chrome Finish with Etched Opal Glass Product Description:

• Requires Four Medium A-Line 100 watt maximum bulbs
• Listed For Damp Location
• Can be mounted either up or down

Product Description

Sea Gull Lighting is one of the most sought after brand names for decorative, functional, specialty indoor lighting and outdoor lighting fixtures.

Customer Reviews

Most helpful customer reviews

7 of 7 people found the following review helpful.
Very Nice
By PO'ed
Great looking light fixture. Puts out a ton of light with 13 watt CFL bulbs. Easy to install. Do not be fooled by appearance, this is a sturdy light fixture.

0 of 0 people found the following review helpful.
Great looking fixture. Not great quality
By Jonathan Pulford
I have a pretty long bathroom and this is the only light in the room. It looks great and works flawlessly. I will say the glass fixtures aren't extremely strong and I broke a very small piece off one.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!