Buy Panasonic BL-C131A Network Camera Wireless 802.11Panasonic BL-C131A Network Camera Wireless 802.11 Product Description:
- Place anywhere you'd like to keep an eye on things, with no PC required at the location
- View and control from a standard web browser, video display, or compatible cell phone or PDA
- Point the camera where you want with eight shooting position presets
- Built-in heat sensor allows record and/or notify by email when someone enters the room
- Connect wirelessly with standard 802.11b/g devices, SSID filtering and 40/64/128-bit WEP encryption
Product Description
Wireless Network Camera Indoor- Panasonic wireless indoor color network camera- MPEG-4 and JPEG- Built-in microphone- Remote pan/tilt control- 802.11 b/G- Resolution 640x480 320x240192x144- 3 image quality modes- Max. 30 frames per second- Security user ID and password- 10X Digital zoom- Lens fixed F2.8- One-way voice direction (from camera to PC)- Built-inhuman detection sensor- Requires included AC adapter- Network Ethernet interface- Motion detection function- 1 Year manufacturer's warranty- SilverFLUSH WALL MOUNT KIT: KX-BL-CA51AKXBLC131A
Customer Reviews
Most helpful customer reviews
427 of 448 people found the following review helpful.
Excellent camera, excellent customer service
By K. Lam
My wife and I wanted to keep an eye on the nanny with our baby from work. After researching the network cameras for several months, it seemed that only Panasonic cameras consistently received positive (usually glowing reviews) whereas cameras from other major brands like Linksys, D-Link, etc received mediocre or poor reviews. So I went with Panasonic. And after about a month, I have to say I am very impressed with it. Some background: I have a classic Linksys WRT54G 802.11g router, with 2 WinXP PCs connected to it via ethernet and 3 more PCs connected wirelessly; plus, I have AT&T/SBC DSL service via a Speedstream 5100 DSL modem. If you're moderately computer literate, you should have no problem following the included instructions to setup (view and control) the camera in wired mode or in wireless WiFi mode.But if you want to setup the camera to be viewed (and controlled) from the internet, you need to do a bit more work. And this is where Panasonic's excellent, excellent customer support comes in. Panasonic's support line is 8_0_0-2_7_2-7_0_3_3; they are open Mon-Fri 9AM-9PM and Sat/Sun 10AM-7PM Eastern US Time; this tech support is available to you for the LIFE of the product. They will walk you through how to setup the camera, configure your router (for, among other things, port forwarding), and register with Panasonic's FREE Dynamic DNS web service. This last point is important: Panasonic network cameras include FREE Dynamic DNS hosting service for the life of the product; other brands offer the service for an annual fee.Okay, step-by-step, here's how to config the camera for internet viewing:First, if you use DSL as I do (as opposed to cable broadband), you have to configure the DSL modem for "bridge mode." (If you don't use DSL, then you can skip this step.) This is because DSL modems act as a router, and port forwarding cannot work behind both the DSL modem's router and (in my case) the Linksys WRT54G router. If you want, you can call your DSL tech support to ask them to walk you through how to "bridge" your DSL modem. But here's what I did.1. Login to your DSL modem (for me, it's 192.168.0.1) using your DSL account (for me, it's my SBCglobal email address).2. Select Advanced >> PPP Location3. Select Bridged Mode (PPPoE is not used), then Change PPP Location4. When prompted, restart the DSL modem5. Login to your router (for me, it's 192.168.1.1)6. Under Setup> Basic Setup >> Internet Connection Type, select PPPoE and enter the DSL login & password info you normally would enter in your DSL modem to authenticate your DSL service.7. At this point, the "bridging" should have been successful. To check that bridging has been successful, click Status >> Router, and check that you are "connected" with an IP address showing. If successful, you should also see that your DSL modem's "internet" LED light is off while your router's "internet" light is on. What you basically have done is to move the point of authentication for your DSL service from the DSL modem to your router; your DSL modem merely acts as a bridge for the DSL service to your router.8. Now, we move on to configuring the camera itself. I assume that the camera has already been configured for wired and wireless mode. Login to the network camera (for me it's, 192.168.1.253).9. Click Setup. Change the Port No. from the default of 80 to 50000 (fifty thousand) and enter the IP address of the camera (for me, it's 192.168.1.253). Click Save, and the camera will restart. When it finishes restarting (taking as long as 1.5 min), it'll bring you back to the "Top" home page of the camera config screen.10. Log back into your router, and go to Applications & Gaming, where you'll be able to set up port forwarding.11. In the Port Range, enter 50000 as "Start" and 50000 as "End." Enter the IP Address of the camera (for me, 192.168.1.253). Check Enable. Save Settings.12. Now, log back into your camera. Go to Setup >> DynamicDNS. Select viewnetcam-dot-com, then Next.13. Click on "Your Account Link" to bring up the viewnetcam.com registration page, where you then select New Registration. Enter your desired registration info and select your domain name at viewnetcam-dot-com (e.g. yourname-dot-viewnetcam-dot-com). Click Choose.14. Now, you will be shown a page confirming your registration. Under DDNS status, you will see Active-waiting. You need to wait up to 10min as the domain registration occurs, at which time, the status will change to Active.15. We're almost done; stay with me! From WinXP Start Menu, click Run and type "cmd" to bring up a DOS window.16. In the DOS window, type "ipconfig/all", which shows your computer's various network information. Under Ethernet adapter Local Area Connection, copy down the two addresses under DNS Servers.17. Log back into your camera, select Setup, and enter the 2 DNS Server addresses from ipconfig/all in the 2 DNS boxes.18. Go back to viewnetcam-dot-com, login to your account, and check that the DDNS status is now Active. If so, then you're all ready to go!19. Go to yourname-dot-viewnetcam-dot-com:50000 to see your network camera on the internet!
120 of 126 people found the following review helpful.Best of consumer web cams (I have tested 20 models)
By Thomas D. Breithaupt
OVERVIEWThe BL-C131A is a wireless/router based camera (no PC needed). In my view, this is the ONLY way cameras should be used due to the unstable PC connected solutions (e.g., PC freeze-up, lost power, etc). It is an IP based system which needs its own local internet address which the included software does a pretty good job setting up automatically.MY EXPERIENCESI have tried over 20 wireless web cameras from 7 brands over the last 5 years ($100-$600) and none are close to the performance, reliability, ease of setup of the Panasonic cams for a consumer based product. Dlink used to lead the pack until the BL-C20A/30A units came out. I was a fan of Dlinks but the software setup, remote camera configurations, and Viewnetcam dynamic DNS service of the the Pana's is just the best today.ADVANTAGES- The included software is the best on the market for finding the camera on your system and trying to configure it automatically. Most software engineers should be SHOT due to sloppy code but the Panasonic software and firmware (software inside the cameras) is pretty good for setup and reliability (I am an electrical engineer so I know the sloppy way most of these guys think).- Tech support for Panasonic is the ONLY support I have contacted from 7 brands with AMERICANS speaking ENGLISH (not "Engrish"). Their patience and overall knowledge is truly outstanding and worth every extra penny this camera costs.- I highly recommend you also buy the Panasonic wireless router. It automatically configures with the cameras and becomes really easy to find/control the cameras.- The ability to reset/reconfigure the cameras remotely is INVALUABLE! I am often travleing in China, at my home in Chicago, or my home in Florida and want to make changes. I can do it remotely with 100% success after the first setup. I was even able to configure some cams in Chicago and Fedex to my wife in Florida and they booted up into the other system perfectly!- The Viewnetcam dynamic DNS service is stunningly reliable. It has never gone down and my cameras reset/refind themselves every hour so if your local ISP dynamically changes your IP address (Comcast is worst) you are always going to have the cams back up in 1 hour.- The ability to snap images, group small video screens, and "mouse-point" the cameras via the pan-tilt-zoom are outstanding.- The built in microphones are AMAZINGLY sensitive and pick up small noises remarkably well. I could hear the kids playing outside the house with cams inside.- The built in multi-screen servers can integrate different models of cameras. For example, I use a BL-C131A cam as #1 at my mom's house for PTZ and audio. I then add a BL-C30A for simple PTZ photo/video and a BL-C20A for fixed photo/video. They all coexist in one screen and work beautifully!- The photo snaps work PERFECTLY for building a simple web page and placing multiple screen snaps on 1 page (I placed 8) thus a super slim matrix of what is happening in my homes. Each photo at 320x240 is only 8kb so they download fast.- The mobile function (viewing on a cell phone browser) works INCREDIBLY well. I use it everyday on my Treo700P via Sprint.DISADVANTAGES/CAUTIONS- ANY web cam is tedious to setup, no matter the brand. Be patient, and call Pana's tech support before returning the unit.- DON'T expect HD quality video - these are 640x480 screens as best and the upload speed of your home network will always be the limiting factor. I do not recommend more than 4 cams online at once since this overloads even a good 768K upload system.- The pan-tilt controls are outstanding. Lots of left-right-down travel but up is limited. Also, the zoom is a digital zoom (NOT an optical zoom) thus very pixelated and not worth much.- The cams can fight for packets and "burble" your VOIP telephone calls.SUMMARYOutstanding product. I now own 14 units around the world and all are stone-cold reliable. Just great products.
80 of 84 people found the following review helpful.It works as advertised
By LS
I have experience with D-Link cameras, and this one is much better. Setup was a multi-step process, but went smoothly, and the free internet address really works. The camera has yet to lose signal, and I have it positioned a the farthest end of my wirelss network. Picture is clear, sound is ok, interface is very good. Only works well with Internet Explorer. On a Mac, the video will display in Firefox but without sound. I haven't expored all of the features yet, but the main thing is that it works (more than can be said for many wireless products).
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
