Buy Jabsco 30573-0000 Marine Pressurized Water Accumulator Tank with Bladder (1-Liter)Jabsco 30573-0000 Marine Pressurized Water Accumulator Tank with Bladder (1-Liter) Product Description:
- 1 Year Warranty
Product Description
Accumulator Tank
This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MATE 2.5 or any Jabsco pressure pumps as found in boats, RV's, motor caravans, coaches and similar applications.
The Accumulator Tank smooths water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system.
The even flow of water gives better control of hot water temperature especially noticeable with instantaneous gas water heaters and with showers.
The reduced on/off cycling reduces noise from the pump motor, and from shock pressures (pipe hammer). It alsoreduces battery drain, and gives longer pump life.
Features:
- Internal Bladder
- Smoother and More Even Flow
- Quieter Water System
- Better Temperature Control
- Longer Pump life
- Lower battery Drain
- Simply fitted to new or existing systems
- Compact size
- Snap-in port fittings include both: 1/2" barbed hose fittings and 1/2" threaded hose fittings
- Tank: hygienic, light, compact, impact and pressure resistant plastic construction
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Great Product
By J. McFarland
Great accumulator, easy to mount, plenty of parts with the unit, and it works very well in my RV. I would have liked to put two in but space was a factor.
2 of 2 people found the following review helpful.Easy to install, reduces pump cycling.
By rich35758
I purchased this to replace the same model that was already installed on my boat. Installation was simple as I already had the fittings from the existing unit. The fittings push into each side and are then locked in place with some sliding wedges. The whole changeout process took less than 5 minutes. In the case of a new installation, you need to find a location where you can mount the housing, and cut into existing lines. This particular unit shipped with one straight and one 90 degree hose barb fitting, while the old unit had straight hose barb fittings on both ends. Since my hoses were already lined up, I reused the existing fittings. Unit works well, greatly reducing the pump cycling.
1 of 1 people found the following review helpful.Great product, compact for tight spaces.
By Kurt Clements
It keeps my water running at a constant pressure with out sputtering and such. Also it's nice when you turn on the faucet the water dose not come on for at least 30 to 40 seconds, which saves wear and tear on the pump.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
