Deals for Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM

Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URMBuy Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM

Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM Product Description:



  • Switched, metered 15-amp power distribution unit with 8 individually controllable outlets
  • Built-in SNMPWEBCARD enables remote power monitoring and control
  • Automatic transfer switching (ATS) provides a redundant power option for mission-critical IT applications
  • Digital meter enables on-site monitoring of total PDU load
  • Configurable for 1U rackmount (horizontal) or 0U (vertical) installation; rackmount hardware included

Product Description

Tripp Lite''s 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power condition via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management to any type of network configuration. Supports notification and logging of input power status, event notification, output power and PDU loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 8 NEMA 5-15R outlets and two 12 ft. 5-15P optional-use dual cords for auto-transfer switching (ATS) option. Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
4Does what it says
By wRx7M
I agree with another reviewer's suggestion of placing the outlets on the back. It is too deep to mount in 1U slot on the back of the rack if you are planning on putting anything deeper than a patch panel or similar object in the corresponding space on the front of the rack. I chose to mount on the front of the rack just below my Ethernet switches and other network appliances, as these are the units that I do not have redundant power supplies on.That being said, I have it connected to 2 SU3000RTXR3U. I have also not been able to successfully update the firmware on the integrated snmp web card but I have not been able to do it on the add-on cards for the SU3000RTX3U units either. I am not sure if it is my 64bit PC running their Java update application but will try to do it from another system, possibly one of the servers.1 star removed for "ergonomics" because of the limited placement options in standard 4-post racks and the firmware update issue I am having.

1 of 1 people found the following review helpful.
5Love the transfer switching!
By com-pair
This power distribution unit is worth it for the Automatic Transfer feature alone. I am using it in a location where power is a problem, especially during the Winter months. We have two Tripp Lite UPS's, on two backup generators and use this PDU to transfer power if one of the systems fail.The only thing that would make this unit better, in my opinion, is if all the outlets were on the back instead of the front.

2 of 3 people found the following review helpful.
4Nice Product
By F. Stafford
This is a pretty nice device. The first one quit a couple weeks after installation. Tech support was very helpful and sent me out a replacement. The new one has been running fine. The web interface is pretty basic. I have several devices plugged into it and it still reads 0 amps. I'm not sure how accurate the amp reading is. I remotely turned a device off, but when I went in it was running. I haven't looked into why it was on. The cycle option works very nice.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Tripp Lite PDUMH15ATNET PDU Switched ATS 120V 15A 5-15R 8 Outlet 2 5-15P Horizontal 1URM