Buy Chicago Pneumatic CP835 Heavy Duty Air NibblerChicago Pneumatic CP835 Heavy Duty Air Nibbler Product Description:
- Strongest Nibbler Available
- Time proven design
- Replaceable nibbler and die
- Min. hose size: 3/8-Inch - 10mm
- Sound dba pressure: 93 - 103
Product Description
CPT835 Features: -Rugged nibbling head and .177" diameter punch cuts steel up to .060" (16 gauge) and aluminum up to .102" (10 gauge)..-Easy access to punch and die for quick replacement.-Four optional cutting positions.-Perfect for accurate cutting of steel and aluminum.-Heavy Duty Air Nibbler. Dimensions: -Best for tight corners and circlesPossible to place die in four different cutting positions. 2,750 strokes per minute; air inlet thread: 1/4" NPTF; minimum hose size: 3/8"; sound dBA: 97; length: 7.5"; weight: 2.25 lbs.. Warranty: -1 yr warranty on material and workmanship.
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Air hungry muncher
By Robert J. Hudson
I purchased this nibbler after doing some research on the net regarding stainless steel and aluminum cutters. This nibbler was rated for 16 gauge thickness on steel and up to 10 gauge on aluminum. From what I read it was estimated that the nibbler could go up to 18 gauge on stainless steel which we had no problem cutting through. Cutting through 10 gauge aluminum was also not a problem. We were surprised that the nibbler was round rather the the more typical rectangular head as this can make a difference in detailed cutouts. We were just making hole cutouts and for that this tool worked well. One concern I have is the amount of air required for long cuts. Our compressor is a 4.5 hp, 120 psi, with a 30 gal capacity and it was easily overwhelmed by this tool. Obviously it is for industrial use and not home use as once the pressure had dropped from 125 psi to 75 psi the compressor could barely stay up with it. Once the pressure had dropped to 75 psi the cutting capability and speed were greatly decreased although the unit continued to cut through both materials at this low pressure. I would recommend this nibbler to anyone with a large (15 hp+) compressor.
0 of 0 people found the following review helpful.Nice tool.
By Michael Cahill
Cuts clean and makes nice turns. Does require a sold air supply. Average compressor at home might not provide enough air pressure to make long cuts.
0 of 0 people found the following review helpful.
Power power power
By S. Cunningham
This thing kicks asz. It did not work on the metal I needed it for because the nibbler back opening was a little to small since this is only made for 16 gauge. It will eat 16 gauge like butter. This uses alot of air so you better have a good compressor if you want it to shine. If they made the opening bigger I bet this could eat its way through thicker metal. Chicago Pneumatic really make s some nice tools.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
